Busy, and a Birthday

It has been a very busy few months at Unit 3 Compliance; it feels like the chamber turntable hasn’t stopped spinning. There has been a wide range of products through the door from prosthetics to video wall controllers, from high spec IoT products to motion sensors, from lighting power supplies to RF amplifiers. I really love the variety of work!

I’ve also had some safety assessment work to carry out on which is always interesting. Disassembling mains transformers to measure the creepage distances inside is fascinating, getting out the angle grinder to hack the laminations apart just adds to the fun.

There have also been a fair amount of design reviews and general consulting work in between. To be able to work with customers right at the start of the project is invaluable as it sets them on the right path without having to find problems further down the line.

I’ve found lots of interesting nuggets of EMC information during this process that I’m looking forward to sharing with you in some future blog posts once I get time to sit down and write them up.

I managed to escape down to Lincoln to speak at the Open Source Hardware User Group oshcamp18 meetup on the subject of EMC testing. The delegates came up with lots of good questions at the end and the audience participation (see below slide) of the talk went down well. Higher! Lower!

play your compliance cards right!

Good to see reconnect with some old contacts and make some new ones. The other talks were very interesting also, lots of good work going on in the open source hardware field at the moment.

Lastly, and it snuck past without me spotting it, Unit 3 Compliance had it’s first birthday. It’s been a whole year since I got the keys to the unit. In that time, and with lots of help, it has gone from this:

the empty unit

Via this:

To this:

And finally this:


Here’s to the next 20 years of compliance, I hope to see you on the way.