Experts in EMC pre-compliance, problem solving and design

Unit 3 Compliance is a West Yorkshire test lab and consultancy specialising in Electro-Magnetic Compatibility (EMC) testing, troubleshooting/problem solving, pre-compliance and product design support.

We have the skills and the tools to fix your EMC problems quickly and effectively.


COVID-19 Update: Unit 3 Compliance is still open. We are accepting products for testing at our Bradford test laboratory with common sense working practices (daily cleaning of key areas, social distancing, etc). Customers are welcome on site to witness tests or to send equipment for remote testing. Design reviews and consultancy services are unaffected.

I hope that you are remaining safe, well and productive. Very much looking forward to a cup of tea and a catch up when things have settled down!

James


EMC Test Lab

Our EMC test lab is well equipped and capable of testing to a wide range of emissions and immunity standards. These test facilities are at your disposal for a much lower price than a big name test lab and are backed up by our in depth engineering, fault finding and problem resolution experience. Our flexibility and low cost makes us an ideal partner for any EMC pre-compliance testing you require.

From integrating wireless capability such as Wi-Fi or Bluetooth to supporting your product through manufacturing and into service we’ve got the EMC knowledge you need to make your product a success.

In addition we offer environmental test services such as temperature/humidity and vibration/shock testing.


CE Marking + More

To get your product onto the global market you need to be up to speed with all the relevant regulations but if you aren’t familiar with them this can be a time consuming activity. We can advise you on the requirements for your product and assess it for CE (EMCD and RED for Europe), FCC (USA), IC/ISED (Canada) and more. In the event that there are problems then we are here to help you solve them with a depth of technical knowledge

It’s not just EMC either – we also advise our customers on electrical safety (LVD, UL), RoHS, WEEE – everything you need to get your product on sale. We also love a good a report and can help you build or review your Technical File and associated documentation.


Philosophy

The approach we take is to help you at all stages of the design to ensure your products are delivered on time and on budget.

Your products are our products – we aren’t happy until you are happy. When you engage with us we become your compliance department, bringing the tools and experience you need to get the job done.


About Us

You can learn more about us and catch up with what we’ve been up to recently in our blog.

Get in touch with us to discuss how we can help you get your products to market successfully.

EMC and testing insights from our Blog:

Schaffner/Teseq NSG 5500 test system

New Automotive Test Capabilities ISO 7637-2

The best day is new equipment day 🙂 We are continuing to…
a roll of Wurth Elektronik copper tape - the scoundrels last resort?

Standards Update for Bluetooth/Zigbee/WLAN Radios

There's a new v2.2.2 revision of ETSI EN 300 328 - the 2.4GHz…
10g 16ms half sine shock test profile

EN 60068-2-27 Shock Testing of Anti-Shock Rubber Mounts

We've been vibration and shock testing of some heavy equipment…
iso 7637-2 pulse 1 vs iec 61000-4-5 waveform comparison

IEC Surge/EFT Generators for ISO 7637-2 Automotive Pre-Compliance

Intro Like most long articles, this started off as a short one. It…

LVD Voltage Limits are RMS + Thoughts on Marginal Voltages

The LVD a.c. voltage limits are defined in terms of rms. From…
a roll of Wurth Elektronik copper tape - the scoundrels last resort?

So You Want To Be An EMC Engineer?

  "Abandon hope all ye who enter here" - Sign above…